B.Sc , Materials Engineering-Industrial Metallurgy , Sistan and Baluchestan University , 2003 → 2007
MS , Materials and Metallurgical Engineering , University of Tehran , 2007 → 2009
PhD , Materials Engineering , Ferdowsi University of Mashhad , 2011 → 2015


2020

تهيه پودرهاي كامپوزيتي حاوي ذرات TiB2 از طريق سنتز احتراقي سيستم Ti

9th International Conference & Exhibition on Materials Science & Metallurgical Engineering (iMat2020)

Sahar Khaje mahmoudi, Mahmood Sharifitabar, Mahdi Shafiee Afarani - 1399/08/20

Fabrication of Al/VB2/Al2O3 composites via combustion synthesis route

9th International Conference & Exhibition on Materials Science & Metallurgical Engineering (iMat2020)

Hossein Ahmadi, Mahmood Sharifitabar, Mahdi Shafiee Afarani - 1399/08/20

Self-propagation high temperature synthesis: A new route for fabrication of porous Mg-doped cerium oxide

5th International Conference on Researches in Science & Engineering & 2nd International Congress on Civil, Architecture and Urbanism in Asia

Zahra Hashemzaiee, Mehdi Shahbakhsh, Sabere Narouie, Hamideh Saravani, Mahmood Sharifitabar - 1399/05/16
2019

Synthesis and identification of the nickel dimethylformamide and thiocyanate [Ni (SCN) 2 (DMF) 4] complex by hydrothermal method

بيستمين كنفرانس شيمي معدني ايران

Zahra Hashemzaiee, Hamideh Saravani, Mahmood Sharifitabar - 1397/12/18
2017

Fabrication of Fe-TiC composite on the surface of steel by submerged arc cladding process

The 6th international conference on materials engineering and metallurgy

Hassan Zeinali Moghaddam, Mahmood Sharifitabar, Ghodratollah Roudini - 1396/08/06

بررسي واكنش سنتز احتراقي خود پيشرونده سيستم C-Mg-B2O3-W

the 6th international conference on materials engineering and metallurgy

, Mahdi Shafiee Afarani, Mahmood Sharifitabar - 1396/08/06

Synthesis of titanium silicide ceramic layer on the surface of Ti-6Al-4V alloy by dip coating process

11th Biennial Congress of the Iranian Ceramic Society 2nd International Conference on Ceramic

Fereydoun Oukati sadeq, Mahdi Shafiee Afarani, Mahmood Sharifitabar - 1396/02/26


2021

مطالعه و طراحي بهبود واحد توليدي تعاوني 3889 لوله و پروفيل سي بل زاهدان

Mahmood Sharifitabar, Hossein Rahmani - 2021
2017

Mahdi Shafiee Afarani, Mahmood Sharifitabar - 2017


Effect of metallic salts as diluent agents on the combustion synthesis of TiO2- B2O3-Mg system

علي ياوري , [ Mahdi Shafiee Afarani, Mahmood Sharifitabar ]
نيمسال اول سال تحصيلي 00-99

Study of combustion synthesis in the V2O5-B2O3-Al and V2O5-B2O3-Mg systems

حسين احمدي , [ Mahdi Shafiee Afarani, Mahmood Sharifitabar ]
نيمسال اول سال تحصيلي99-98

Study of self -propagating high-temperature synthesis of TiO2-B2O3-Mg and ZrO2-B2O3-Mg systems

سحر خواجه محمودي , [ Mahmood Sharifitabar, Mahdi Shafiee Afarani ]
نيمسال اول سال تحصيلي99-98

Fatigue behavior study of inconel 625 alloy fabricated via gas metal arc welding additive manufacturing method

قاسم پيروزمنش , [ Mahdi Shafiee Afarani, Mahmood Sharifitabar ]
نيمسال اول سال تحصيلي 98-97

علي ملازاده كشكويي , [ Mahdi Shafiee Afarani, Mahmood Sharifitabar ]
نيمسال دوم سال تحصيلي 97-96

Fabrication of stainless steel alloy parts by gas metal arc additive manufacturing

علي يادگار , [ Mahdi Shafiee Afarani, Mahmood Sharifitabar ]
نيمسال اول سال تحصيلي 97-96

Fabrication of Ni-based alloy parts by gas metal arc additive manufacturing

ابوالفضل صفرزاده , [ Mahdi Shafiee Afarani, Mahmood Sharifitabar ]
نيمسال اول سال تحصيلي 97-96

Railway welding using narrow gap smaw, thermit and flash butt welding processes, microstructure and mechanical properties

مصطفي پاسبان , [ Mahdi Shafiee Afarani, Mahmood Sharifitabar ]
نيمسال دوم سال تحصيلي 96-95

investigating combustion characteristics of WO3B2O3MgC

جعفر قربان تبارعمران , [ Mahdi Shafiee Afarani, Mahmood Sharifitabar ]
نيمسال اول سال تحصيلي96-95

synthesis of TiSi system coating on Ti6Al4V

فريدون اوكاتي صادق , [ Mahdi Shafiee Afarani, Mahmood Sharifitabar ]
نيمسال اول سال تحصيلي96-95

fabrication of FeTic composite on the surface of steel via submeged arc cladding process

حسن زينلي مقدم , [ Mahmood Sharifitabar, Ghodratollah Roudini ]
نيمسال اول سال تحصيلي96-95

Self propagation high temperature synthesis (SHS) of WC-ZrC-Al2O3 composite

عليرضا ميرابي , [ Mahdi Shafiee Afarani, Mahmood Sharifitabar ]
نيمسال دوم سال تحصيلي94-95

رامين احمدي خواه , [ Ghodratollah Roudini, Mahmood Sharifitabar ]
نيمسال دوم سال تحصيلي94-95

Self propagation high temperature synthesis of TiC-ZrC-Al2O3 composite

محسن رضائي زاده , [ Mahdi Shafiee Afarani, Mahmood Sharifitabar ]
نيمسال اول سال تحصيلي94-95

محسن نظرزاده , [ Mahdi Shafiee Afarani, Mahmood Sharifitabar ]
نيمسال اول سال تحصيلي 91-90


1 - Mahmood Sharifitabar, Samira Khorshahian, Mahdi Shafiee Afarani, Pravin Kumar, Neelesh Kumar Jain, High-temperature oxidation performance of Inconel 625 superalloy fabricated by wire arc additive manufacturing , CORROSION SCIENCE. (2022) 197 110087 -1-110087-13
2 - Zahra Hashemzaiee, Hamideh Saravani, Mahmood Sharifitabar, Mehdi Shahbakhsh, Copper nanowires / poly (naphtoquinone chromium (III)) for simultaneous voltammetric detection of para - aminophenol, phenol and para - nitrophenol , MICROCHEMICAL JOURNAL. (2022) 175 107210-1-107210-12
3 - Mahmood Sharifitabar, , Investigation of microstructure and mechanical properties of dissimilar joints between AISI 321 stainless steel and X65 high-strength low-alloy steel , مهندسي متالورژي و مواد. (2022) 33 71-86
4 - Meysam Salarpour, Mahmood Sharifitabar, Hossein Amirabadi, Characterization of 1050Al/Al3Ni/ZrO2 hybrid surface composites fabricated by friction stir processing , International Journal of Applied Ceramic Technology. (2022) 19 2379-2392
5 - ALI MOLAZADEH, Mahmood Sharifitabar, Mahdi Shafiee Afarani, Effects of Heat Treatment on the Microstructure, Mechanical Properties and Corrosion Behavior of 2209 Duplex Stainless Steel Parts Manufactured By Wire Arc Additive Manufacturing Process , فرآيندهاي نوين در مهندسي مواد. (2022) 60 63-75
6 - Zahra Hashemzaiee, Hamideh Saravani, Mahmood Sharifitabar, Mehdi Shahbakhsh, Combustion synthesis of sponge-like CeOsub>2/sub> powder for selective determination of uric acid in biological fluids , Journal of Particle Science and Technology. (2021) 7 73-82
7 - Sahar Khaje mahmoudi, Mahmood Sharifitabar, Mahdi Shafiee Afarani, Preparation of composite powders containing TiB2 and ZrB2 particles through combustion synthesis of TiO2-ZrO2-B2O3-Mg system , CERAMICS INTERNATIONAL. (2021) 47 3911-3919 View Paper
8 - Mahmood Sharifitabar, Fereydoun Oukati sadeq, Mahdi Shafiee Afarani, Synthesis and kinetic study of Mo(Si,Al)2 coatings on the surface of molybdenum through hot dipping into a commercial Al-12 wt.%Si alloy melt , Surfaces and Interfaces. (2021) 24 1 -101044-7 -101044 View Paper
9 - Ghasem Pirouzmanesh, Mahmood Sharifitabar, Mahdi Shafiee Afarani, Fatigue Properties of Inconel 625 Alloy Parts Manufactured by Wire Arc Additive Manufacturing Method , مهندسي متالورژي و مواد. (2021) 32 137-148
10 - Mahmood Sharifitabar, On the formation of Al2O3 nanofibers during self-propagating high-temperature synthesis of TiO2-Al-C system in various environments , CERAMICS INTERNATIONAL. (2020) 46 17053-17061 View Paper
11 - Mahmood Sharifitabar, Microstructure Investigation and Mechanical Properties of Resistance Upset Butt Welded Ti-6Al-4V Alloy , International Journal of Advanced Design and Manufacturing Technology. (2020) 13 91-97
12 - Abolfazl Safarzade, Mahmood Sharifitabar, Mahdi Shafiee Afarani, Effects of heat treatment on microstructure and mechanical properties of Inconel 625 alloy fabricated by wire arc additive manufacturing process , TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA. (2020) 30 3016-3030 View Paper
13 - Hassan Zeinali Moghaddam, Mahmood Sharifitabar, Ghodratollah Roudini, Microstructure and wear properties of Fe-TiC composite coatings produced by submerged arc cladding process using ferroalloy powder mixtures , SURFACE and COATINGS TECHNOLOGY. (2019) 361 91-101 View Paper
14 - , Mahmood Sharifitabar, Mahdi Shafiee Afarani, Self-propagating high-temperature synthesis of (Zr,W)C/WC/Al2O3 composite powders from WO3-ZrO2-Al-C system , INTERNATIONAL JOURNAL OF REFRACTORY METALS and HARD MATERIALS. (2019) 82 279-286 View Paper
15 - Mahmood Sharifitabar, Synthesis and Evaluation of Properties and Detachment Mechanism of Ti(C,N) Coatings Produced on the Surface of Ti-6Al-4V Alloy by Pack Nitro-Carburizing Process , علوم و مهندسي سطح ايران. (2019) 39 59-67
16 - Zahra Hashemzaiee, Mahmood Sharifitabar, Hamideh Saravani, Meissam Noroozifar, Synthesis of porous Mg-doped CeO2 powders via self-propagating high-temperature synthesis route , ADVANCED POWDER TECHNOLOGY. (2019) 30 2947-2956 View Paper
17 - , Mahmood Sharifitabar, Ghodratollah Roudini, Effects of Ti addition on the microstructure and mechanical properties of multi-pass E6010 high-cellulosic electrode weld metal , APPLIED PHYSICS A-MATERIALS SCIENCE and PROCESSING. (2018) 124 1-772-12-772 View Paper
18 - Fereydoun Oukati sadeq, Mahmood Sharifitabar, Mahdi Shafiee Afarani, Synthesis of TiSiAl coatings on the surface of Ti6Al4V alloy via hot dip siliconizing route , SURFACE and COATINGS TECHNOLOGY. (2018) 337 349-356
19 - , Mahdi Shafiee Afarani, Mahmood Sharifitabar, Effect of extra carbon addition on the self-propagation high-temperature synthesis characteristics of WO3-H3BO3-Mg-C system , CERAMICS INTERNATIONAL. (2018) 44 20115-20121
20 - , Mahmood Sharifitabar, Mahdi Shafiee Afarani, On the self-propagating high-temperature synthesis of tungsten boride containing composite powders from WO 3 B 2 O 3 Mg system , CERAMICS INTERNATIONAL. (2018) 44 14355-14362 View Paper
21 - , Mahdi Shafiee Afarani, Mahmood Sharifitabar, Fast synthesis of MgAl2O4W and MgAl2O4WW2B composite powders by self-propagating high-temperature synthesis reactions , CERAMICS INTERNATIONAL. (2018) 44 6508-6513
22 - Mahmood Sharifitabar, Comment on the article Contribution of mechanical activation and annealing in the formation of nanopowders of Al(Cu)/TiC-Al2O3 hybrid nanocomposite H. Mostaan et al. Ceramics International 43 (2017) 26802685 , CERAMICS INTERNATIONAL. (2017) 43 8543-8543
23 - , Mahdi Shafiee Afarani, Mahmood Sharifitabar, WCTiCAl2O3 composite powder preparation by self-propagating hightemperature synthesis route , CERAMICS INTERNATIONAL. (2017) 43 15685-15693
24 - Mahmood Sharifitabar, J. Vahdati Khaki, , Microstructure and wear resistance of in-situ TiC - Al 2 O 3 particles reinforced Fe-based coatings produced by gas tungsten arc cladding , SURFACE and COATINGS TECHNOLOGY. (2016) 285 47-56
25 - Mahmood Sharifitabar, Jalil Vahdati Khaki, , Fabrication of Fe-TiC-Al2O3 composites on the surface of steel using a TiO2-Al-C-Fe combustion reaction induced by gas tungsten arc cladding , International Journal of Minerals Metallurgy and Materials. (2016) 23 193-204
26 - Mahmood Sharifitabar, , , Effect of friction stir processing pass sequence on properties of MgZrSiO4Al2O3 surface hybrid micro/nano-composites , MATERIALS and DESIGN. (2016) 108 1-7
27 - Mahmood Sharifitabar, , , Formation mechanism of TiC-Al2O3-Fe3Al composites during self-propagating high-temperature synthesis of TiO2-Al-C-Fe system , CERAMICS INTERNATIONAL. (2016) 42 12361-12370
28 - , , , Mahmood Sharifitabar, , Fabrication of in situ Al2O3 reinforced nanostructure 304 stainless steel matrix composite by self-propagating high temperature synthesis process , Materials. (2015) 84 325-330
29 - Mahmood Sharifitabar, j v, , Effects of Fe additions on self propagating high temperature synthesis characteristics of TiO2-Al-C system , INTERNATIONAL JOURNAL OF REFRACTORY METALS and HARD MATERIALS. (2014) 47 93-101
30 - Mahdi Shafiee Afarani, , Mahmood Sharifitabar, Synthesis of Ti(C, N) ceramic layer on surface of Ti-6Al-4V alloy via pack nitro-carburizing route , SURFACE and COATINGS TECHNOLOGY. (2013) 219 94-100
31 - , MOHSEN NAZARZADEH, Mahmood Sharifitabar, Mahdi Shafiee Afarani, Gas tungsten arc welding of CP-copper to 304 stainless steel using different filler materials , TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA. (2012) 22 2937-2942
32 - Mahmood Sharifitabar, Microstructure and mechanical properties of friction stir welded Al/Mg2Si metal matrix cast composite , materials design. (2011) 32 976-983
33 - Mahdi Shafiee Afarani, Mahmood Sharifitabar, Asma Sarani, , Fabrication of 5052Al/Al2O3 nanoceramic particle reinforced composite via friction stir processing route , materials design. (2011) 4164-4172
34 - Mahmood Sharifitabar, Resistance upset butt welding of austenitic to martensitic stainless steels , materials design. (2010) 31 3044-3050