B.Sc , Materials Engineering , Imam Khomeini International University , 1993 → 1997
MS , Materials Engineering , Materials and Energy Research Center , 1997 → 1999
PhD , Materials Engineering , Materials and Energy Research Center , 1999 → 2004


2020

Effect of fuel type on CeO2 foam support synthesized by solution combustion for modified of palladium particles toward ethanol electrooxidation

9th Iran International Conference on Materials Science & Metallurgical Engineering (iMat2020)

Salehe Gomroki, Zahra Yavari, Mahdi Shafiee Afarani - 1399/08/20

A comparison on the presence of iron ions in spongy zinc oxide as a support for palladium nanocatalysts towards diethylene glycol electrooxidation

9th Iran International Conference on Materials Science & Metallurgical Engineering (iMat2020)

Fariba Kaedi, Zahra Yavari, Ahmad Reza Abbasian, Mahdi Shafiee Afarani - 1399/08/20

تهيه پودرهاي كامپوزيتي حاوي ذرات TiB2 از طريق سنتز احتراقي سيستم Ti

9th International Conference & Exhibition on Materials Science & Metallurgical Engineering (iMat2020)

Sahar Khaje mahmoudi, Mahmood Sharifitabar, Mahdi Shafiee Afarani - 1399/08/20

Fabrication of Al/VB2/Al2O3 composites via combustion synthesis route

9th International Conference & Exhibition on Materials Science & Metallurgical Engineering (iMat2020)

Hossein Ahmadi, Mahmood Sharifitabar, Mahdi Shafiee Afarani - 1399/08/20
2019

The Effect of Fuel Type on Solution Combustion Synthesis of Lithium Metatitanate

The 12th Congerss of Iranian Ceramic Society

Hoora Kaspoor, Ahmad Reza Abbasian, Mahdi Shafiee Afarani - 1398/02/10

Investigating the effect of fuel type on the combustion synthesis of cerium oxide used as corrosion inhibitor

دوازدهمين كنگره سراميك ايران

Zahra Ghahramani, Amir Masoud Arabi, Mohammad Mahdavian, Mahdi Shafiee Afarani - 1398/02/10
2017

بررسي واكنش سنتز احتراقي خود پيشرونده سيستم C-Mg-B2O3-W

the 6th international conference on materials engineering and metallurgy

, Mahdi Shafiee Afarani, Mahmood Sharifitabar - 1396/08/06

Synthesis of titanium silicide ceramic layer on the surface of Ti-6Al-4V alloy by dip coating process

11th Biennial Congress of the Iranian Ceramic Society 2nd International Conference on Ceramic

Fereydoun Oukati sadeq, Mahdi Shafiee Afarani, Mahmood Sharifitabar - 1396/02/26
2009

Effect of Zn addition on optical properties and microstructure of Y2O3 Eu nanopowders by solution combustion method

trends in nanotechnology

Esmaeil Tohidlou, , , Mahdi Shafiee Afarani - 1388/09/09

Effect of Zn addition on luminescence of Y2O3 Eu nanopowders using solution combustion method

2nd International Conference on Ultrafine Grained and Nanostructured Materials

Esmaeil Tohidlou, , , Mahdi Shafiee Afarani - 1388/08/23

aisi 8620

چهرمين همايش ملي عمليات حرارتي

Reza Elmi hosseini, Esmaeil Tohidlou, Mahdi Shafiee Afarani - 1388/02/01


Study of combustion synthesis in the V2O5-B2O3-Al and V2O5-B2O3-Mg systems

حسين احمدي , [ Mahdi Shafiee Afarani, Mahmood Sharifitabar ]
نيمسال اول سال تحصيلي99-98

Investigation on sintering behavior of cordierite powders synthesized by solution combustion method

حديثه بلالي زاده , [ Mahdi Shafiee Afarani, Ahmad Reza Abbasian ]
نيمسال اول سال تحصيلي99-98

Solution combustion synthesis of Fe-Cr-Al-Zn brown pigment for ceramic ink jet printers

فاطمه پابرجي , [ Mahdi Shafiee Afarani, , ]
نيمسال اول سال تحصيلي99-98

Study of self -propagating high-temperature synthesis of TiO2-B2O3-Mg and ZrO2-B2O3-Mg systems

سحر خواجه محمودي , [ Mahmood Sharifitabar, Mahdi Shafiee Afarani ]
نيمسال اول سال تحصيلي99-98

synthesis of YAG/CdSe hybrid luminescent pigment

نيكو رضائيان , [ Mahdi Shafiee Afarani, , D D ]
نيمسال اول سال تحصيلي 98-97

Fatigue behavior study of inconel 625 alloy fabricated via gas metal arc welding additive manufacturing method

قاسم پيروزمنش , [ Mahdi Shafiee Afarani, Mahmood Sharifitabar ]
نيمسال اول سال تحصيلي 98-97

Control of drug release using electrspun nano-polymer fibers on titania nanotubes

صبيحه فارسي , [ Davod Mohebbi Kalhori, Mahdi Shafiee Afarani ]
نيمسال اول سال تحصيلي 98-97

Fabrication of stainless steel alloy parts by gas metal arc additive manufacturing

علي يادگار , [ Mahdi Shafiee Afarani, Mahmood Sharifitabar ]
نيمسال اول سال تحصيلي 97-96

Fabrication of Ni-based alloy parts by gas metal arc additive manufacturing

ابوالفضل صفرزاده , [ Mahdi Shafiee Afarani, Mahmood Sharifitabar ]
نيمسال اول سال تحصيلي 97-96

study of the parameters during the synthesis of Li2TiO3 nanostructure via hydrothermal route

حورا كاس پور , [ Mahdi Shafiee Afarani, Ahmad Reza Abbasian ]
نيمسال اول سال تحصيلي 97-96

combustion synthesis of nanostructure mesoporous CeO2 as Corrosion inhibitor reservoir

زهرا قهرماني , [ Mahdi Shafiee Afarani, , ]
نيمسال اول سال تحصيلي 97-96

Railway welding using narrow gap smaw, thermit and flash butt welding processes, microstructure and mechanical properties

مصطفي پاسبان , [ Mahdi Shafiee Afarani, Mahmood Sharifitabar ]
نيمسال دوم سال تحصيلي 96-95

investigating combustion characteristics of WO3B2O3MgC

جعفر قربان تبارعمران , [ Mahdi Shafiee Afarani, Mahmood Sharifitabar ]
نيمسال اول سال تحصيلي96-95

synthesis of TiSi system coating on Ti6Al4V

فريدون اوكاتي صادق , [ Mahdi Shafiee Afarani, Mahmood Sharifitabar ]
نيمسال اول سال تحصيلي96-95

combustion synthesis of ZnOZnS quantom dots

مجيد ظهيري , [ Mahdi Shafiee Afarani, ]
نيمسال اول سال تحصيلي96-95

Effect of Fuel Type and Concentration on Morphology and Optical Properties of ZnO Nanoparticles Synthesized by Combustion Synthesis Method

حسن محمودي , [ Mahdi Shafiee Afarani, ]
نيمسال دوم سال تحصيلي94-95

Self propagation high temperature synthesis (SHS) of WC-ZrC-Al2O3 composite

عليرضا ميرابي , [ Mahdi Shafiee Afarani, Mahmood Sharifitabar ]
نيمسال دوم سال تحصيلي94-95

Self propagation high temperature synthesis of TiC-ZrC-Al2O3 composite

محسن رضائي زاده , [ Mahdi Shafiee Afarani, Mahmood Sharifitabar ]
نيمسال اول سال تحصيلي94-95

Synthesis of magnetic fluids with nano composite Fe3O4 and CuO quantum dots

زهرا دستجردي , [ Mahdi Shafiee Afarani, , ]
نيمسال اول سال تحصيلي94-95

Synthesis of ZnO doped TiO2 nanopowders and study of its photocatalytic properties on Arsenic removal from industrial wastewater

منصور عرب نژاد , [ Mahdi Shafiee Afarani, ]
نيمسال اول سال تحصيلي94-95

Synthesis of Cu (Al2O3/SiO2) layer hibrid compositeby combination of electrophoresis and hot pressing methods

حميدرضا نورزايي , [ Ghodratollah Roudini, Mahdi Shafiee Afarani ]
نيمسال اول سال تحصيلي94-93

synthesis of cadmium selenide quantom dots-carbon nano tube composites

بهزاد كريمي , [ Mahdi Shafiee Afarani, ]
نيمسال اول سال تحصيلي94-93

synthesis of copper oxide quantum dots

فاطمه پيري , [ Mahdi Shafiee Afarani, , ]
نيمسال اول سال تحصيلي94-93

synthesis of Al(Al2O3/SiC) layer hibrid composite by combination of electrophoresis and hot pressing methods

عاطفه اكبريان , [ Ghodratollah Roudini, Mahdi Shafiee Afarani ]
نيمسال اول سال تحصيلي94-93

synthesis of Al(Al2O3/Sio2) layer hibrid composite by combination of electrophoresis and hot pressing methods

هانيه صفاري , [ Ghodratollah Roudini, Mahdi Shafiee Afarani ]
نيمسال اول سال تحصيلي94-93

prepation of PCL/OCP composite scaffold using electrospining method for bone tissue engineering

زهره حيدري , [ Davod Mohebbi Kalhori, Mahdi Shafiee Afarani ]
نيمسال اول سال تحصيلي94-93

Synthesis of copper oxide ceramic ink for photocatalytic application

مشكاندخت خسروي , [ Mahdi Shafiee Afarani, , ]
نيمسال اول سال تحصيلي94-93

fabrication of Al/SiC-Al2O3 interpenetratig phases composite

محسن باقري دولت ابادي , [ Ghodratollah Roudini, Mahdi Shafiee Afarani ]
نيمسال اول سال تحصيلي94-93

synthesis of ZnS:Mn nano-pigment for luminescent ink application

فاطمه اسمعيلي , [ Mahdi Shafiee Afarani, , ]
نيمسال اول سال تحصيلي94-93

synthesis of octacalcium phosphate for biomedical applications

سجاد احمدي شاهرخت , [ Mahdi Shafiee Afarani, Davod Mohebbi Kalhori, ]
نيمسال اول سال تحصيلي93-92

electrospinning of titaniananofibers for bone tissue engineering scaffold

سيدمحمد حسيني , [ Davod Mohebbi Kalhori, Mahdi Shafiee Afarani ]
نيمسال اول سال تحصيلي93-92

fabrication of functionally graded tortuosity alumina supports via slip casting route for bone tissue engineering scaffold

فاطمه سرحدي , [ Mahdi Shafiee Afarani, Davod Mohebbi Kalhori, Masoud Shayesteh ]
نيمسال اول سال تحصيلي93-92

fabrication of Al/SiC-Al2O3 interpenetratig phases composite

محسن باقري دولت ابادي , [ Ghodratollah Roudini, Mahdi Shafiee Afarani ]
نيمسال اول سال تحصيلي93-92

combustion synthesis of fluorescence pigment based on aluminate structure

محمد مرادي گل شيخ , [ Mahdi Shafiee Afarani, ]
نيمسال اول سال تحصيلي 92-91

Synthesis of nanosize TiO2 and TiO2-WO3 nanocomposite and investigation of their photocatalysis properties

محبوبه دهستاني , [ Mahdi Shafiee Afarani, Masoud Shayesteh, ]
نيمسال اول سال تحصيلي90-89

The effect of packing on sintered alumina porous supports

محمدجواد قادري , [ Mahdi Shafiee Afarani, Ghodratollah Roudini ]
نيمسال اول سال تحصيلي90-89

Synthesis of alomina granules using high shear mixer

احسان بهادري يكتا , [ Mahdi Shafiee Afarani, Abdolreza Samimi ]
نيمسال اول سال تحصيلي90-89


1 - Mahmood Sharifitabar, Fereydoun Oukati sadeq, Mahdi Shafiee Afarani, Synthesis and kinetic study of Mo(Si,Al)2 coatings on the surface of molybdenum through hot dipping into a commercial Al-12 wt.%Si alloy melt, Surfaces and Interfaces. (2021) 24 1 -101044-7 -101044 View Paper
2 - Hoora Kaspoor, Ahmad Reza Abbasian, Mahdi Shafiee Afarani, The preparation of Li2TiO3 powder via solution combustion synthesis for using in fusion reactor as tritium breeder, علوم و فنون هسته اي. (2021) 94 11-20
3 - Sahar Khaje mahmoudi, Mahmood Sharifitabar, Mahdi Shafiee Afarani, Preparation of composite powders containing TiB2 and ZrB2 particles through combustion synthesis of TiO2-ZrO2-B2O3-Mg system, CERAMICS INTERNATIONAL. (2021) 47 3911-3919 View Paper
4 - Pedram Perozmanesh, Mahmood Sharifitabar, Mahdi Shafiee Afarani, Fatigue Properties of Inconel 625 Alloy Parts Manufactured by Wire Arc Additive Manufacturing Method, مهندسي متالورژي و مواد. (2021) 32 137-148
5 - Zahra Yavari, Mahdi Shafiee Afarani, Amir Masoud Arabi, Meissam Noroozifar, Electrooxidation of single-carbon molecules by nanostructured Pd-decorated spongy ceria, KOREAN JOURNAL OF CHEMICAL ENGINEERING. (2020) 37 1669-1679
6 - Abolfazl Safarzade, Mahmood Sharifitabar, Mahdi Shafiee Afarani, Effects of heat treatment on microstructure and mechanical properties of Inconel 625 alloy fabricated by wire arc additive manufacturing process, TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA. (2020) 30 3016-3030 View Paper
7 - Zahra Ghahramani, Amirmasoud Arabi, Mahdi Shafiee Afarani, Mohammad Mahdavian, Solution combustion synthesis of cerium oxide nanoparticles as corrosion inhibitor, International Journal of Applied Ceramic Technology. (2020) 17 1514-1521
8 - Ahmad Reza Abbasian, Samira Hoseyni ramaghani, Masoud Shayesteh, Mahdi Shafiee Afarani, Masoud Rafig, Ultrasonic-assisted solvothermal synthesis of self-assembled Copper Ferrite nanoparticles, International Journal of Nano Dimension. (2020) 11 130-144
9 - Fariba Kaedi, Zahra Yavari, Mahdi Shafiee Afarani, Meissam Noroozifar, Synergistic influence of spongy ZnO on catalytic activity of nano-catalyst Pd toward electrooxidation of liquid fuels, JOURNAL OF POROUS MATERIALS. (2020) 27 1203-1211 View Paper
10 - Ahmad Reza Abbasian, Zahra Lorfasai, Masoud Shayesteh, Mahdi Shafiee Afarani, Synthesis of cobalt ferrite colloidal nanoparticle clusters by ultrasonic-assisted solvothermal process, Journal of the Australian Ceramic Society. (2020) 56 1119-1126 View Paper
11 - Behzad Karimi, Mahdi Shafiee Afarani, Arabi Amir Masoud, Hydrothermal synthesis of cadmium selenide quantum dots: effect of reducing agent, APPLIED PHYSICS A-MATERIALS SCIENCE and PROCESSING. (2020) 126 706-1-706-9
12 - , Mahdi Shafiee Afarani, Amir Masoud Arabi, Synthesis of copper oxide quantum dots: effect of surface modifiers, Materials Research Express. (2019) 6 125006-1-125006-9
13 - Majid Zahiri, Mahdi Shafiee Afarani, Arabi Amir Masoud, Combustion Synthesis of ZnO/ZnS Nanocomposite Phosphors, JOURNAL OF FLUORESCENCE. (2019) 5 1227-1239
14 - Ali reza Avval, Amir Masoud Arabi, Mahdi Shafiee Afarani, Surface modification of carbon nanotubes for the synthesis of CNTs/ZnS quantum dot composites via electrophoretic deposition route, Materials Research Express. (2019) 6 -
15 - Mohammad Moradi golsheikh, Amir Masoud Arabi, Mahdi Shafiee Afarani, Microwave assisted combustion synthesis of photolumiescent ZnAl2O4:Eu nano powders, Materials Research Express. (2019) 6 125052-
16 - Majid Zahiri, Mahdi Shafiee Afarani, Amir Masoud Arabi, Synthesis of zinc oxide and zinc oxide/zinc sulfide nano composite via solution combustion route, Materials Research Express. (2019) 6 1250g5-
17 - Mozhgan Shahmirzaee, Mahdi Shafiee Afarani, Iran Nejhad Ahmad, Arabi Amir Masoud, Microwave-assisted combustion synthesis of ZnAl2O4 and ZnO nanostructure particles for photocatalytic wastewater treatment, PARTICULATE SCIENCE AND TECHNOLOGY. (2019) 37 110-117
18 - , Mahmood Sharifitabar, Mahdi Shafiee Afarani, Self-propagating high-temperature synthesis of (Zr,W)C/WC/Al2O3 composite powders from WO3-ZrO2-Al-C system, INTERNATIONAL JOURNAL OF REFRACTORY METALS and HARD MATERIALS. (2019) 82 279-286 View Paper
19 - , Mahdi Shafiee Afarani, Arabi Amir Masoud , Davod Mohebbi Kalhori, Co-precipitation Synthesis of CdTe/ ZnS, ZnSe, CdS and CdSe Core-Shell Quantum Dots, علوم و فناوري رنگ. (2019) 13 89-98
20 - Ahmad Reza Abbasian, Mahdi Shafiee Afarani, One-step solution combustion synthesis and characterization of ZnFe2O4 and ZnFe1.6O4 nanoparticles, APPLIED PHYSICS A-MATERIALS SCIENCE and PROCESSING. (2019) 125 - View Paper
21 - , Mahdi Shafiee Afarani, Abdolhamid Jafari, Co-precipitation synthesis of ZnO-TiO2 nanostructure composites for arsenic photodegradation from industrial wastewater, International Journal of Environmental Sciences and Technology. (2019) 16 463-468
22 - Fereydoun Oukati sadeq, Mahmood Sharifitabar, Mahdi Shafiee Afarani, Synthesis of TiSiAl coatings on the surface of Ti6Al4V alloy via hot dip siliconizing route, SURFACE and COATINGS TECHNOLOGY. (2018) 337 349-356
23 - Behzad Karimi, Amir masoud Arabi, Farhoud Najafi, Mahdi Shafiee Afarani, CNTCdSe QDs nanocomposites synthesis and photoluminescence studies, JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS. (2018) 29 13499-13507
24 - , Mahdi Shafiee Afarani, Mahmood Sharifitabar, Effect of extra carbon addition on the self-propagation high-temperature synthesis characteristics of WO3-H3BO3-Mg-C system, CERAMICS INTERNATIONAL. (2018) 44 20115-20121
25 - Majid Zahiri, Mahdi Shafiee Afarani, Amir Masoud Arabi, Dual functions ofthiourea forsolution combustion synthesis ofZnO/ZnS composite powders fuel andsulphur source, APPLIED PHYSICS A-MATERIALS SCIENCE and PROCESSING. (2018) 124 663-1-663-6
26 - , Mahmood Sharifitabar, Mahdi Shafiee Afarani, On the self-propagating high-temperature synthesis of tungsten boride containing composite powders from WO 3 B 2 O 3 Mg system, CERAMICS INTERNATIONAL. (2018) 44 14355-14362 View Paper
27 - , Mehdi Ghahari, Mahdi Shafiee Afarani, Atasheh Soleimani, Synthesis of ZnS-Mn nano-luminescent pigment for ink applications, Journal of Coatings Technology and Research. (2018) 15 1325-1332
28 - , Abdolreza Samimi, Mahdi Shafiee Afarani, , Effects of porosity and pore size distribution on mechanical strength reliability of industrial-scale catalyst during preparation and catalytic test steps, PARTICULATE SCIENCE AND TECHNOLOGY. (2018) 36 96-103
29 - , Mahdi Shafiee Afarani, Mahmood Sharifitabar, Fast synthesis of MgAl2O4W and MgAl2O4WW2B composite powders by self-propagating high-temperature synthesis reactions, CERAMICS INTERNATIONAL. (2018) 44 6508-6513
30 - Keyvan Piry, Mahdi Shafiee Afarani, Ghodratollah Roudini, FABRICATION OF HIGH VOLUME FRACTION ALUMINA/ALUMINUM COMPOSITES VIA REACTION SINTERING ROUTE, Journal of Chemical Technology and Metallurgy. (2017) 52 12-18
31 - Mozhgan Shahmirzaee, Mahdi Shafiee Afarani, , , In situ crystallization of ZnAl2O4/ZnO nanocomposite on alumina granule for photocatalytic purification of wastewater, RESEARCH ON CHEMICAL INTERMEDIATES. (2017) 43 321-340
32 - Behzad Karimi, , Mahdi Shafiee Afarani, Synthesis of carbon nanotube-cadmium selenide luminescent nanocomposites using electrophoretic deposition technique, JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS. (2017) 28 1247-1252
33 - , Abdolreza Samimi, Mahdi Shafiee Afarani, , Interaction between Weibull parameters and mechanical strength reliability of industrial-scale water gas shift catalysts, Particuology. (2017) 32 160-166
34 - , Davod Mohebbi Kalhori, Mahdi Shafiee Afarani, Microbial fuel cell (MFC) using commercially available unglazed ceramic wares Low-cost ceramic separators suitable for scale-up, INTERNATIONAL JOURNAL OF HYDROGEN ENERGY. (2017) 42 8233-8241
35 - , Mahdi Shafiee Afarani, Mahmood Sharifitabar, WCTiCAl2O3 composite powder preparation by self-propagating hightemperature synthesis route, CERAMICS INTERNATIONAL. (2017) 43 15685-15693
36 - Meysam Araghi, mahdi ghahai, Mahdi Shafiee Afarani, Synthesis and investigation of antimicrobial properties of SiO2Cu rods with core-shell structure, Journal of Environmental Chemical Engineering. (2017) 5 1780-1790
37 - , Davod Mohebbi Kalhori, Mahdi Shafiee Afarani, Engineered electrospun polycaprolactone (PCL)/octacalcium phosphate (OCP) scaffold for bone tissue engineering, Materials Science and Engineering C-Materials for Biological Applications. (2017) 127-132
38 - , amirmasoud aarabi, Mahdi Shafiee Afarani, , Synthesis of Fe3O4 and Fe3O4-CuO Magnetic Nanopigments by Precipitation Method, علوم و فناوري رنگ. (2017) 11 287-295
39 - Fateme Sarhadi, Mahdi Shafiee Afarani, , Masoud Shayesteh, Fabrication of alumina porous scaffolds with aligned oriented pores for bone tissue engineering applications, . (2016) 122 1-8
40 - Fateme Sarhadi, Mahdi Shafiee Afarani, Davod Mohebbi Kalhori, Masoud Shayesteh, Fabrication of alumina porous scaffolds with aligned oriented pores for bone tissue engineering applications, APPLIED PHYSICS A-MATERIALS SCIENCE and PROCESSING. (2016) 122 1-8
41 - Masoud Shayesteh, Abdolreza Samimi, Mahdi Shafiee Afarani, , Synthesis of titania–-alumina multilayer nanomembranes on performance-improved alumina supports for wastewater treatment, Desalination and Water Treatment. (2016) 20 9115-9122
42 - , Massoud Kaykhaii, Mahdi Shafiee Afarani, , Determination of mefenamic acid in urine and pharmaceutical samples by HPLC after pipette-tip solid phase microextraction using zinc sulfide modified carbon nanotubes, Analytical Methods. (2016) 8 5978-5983
43 - Mahdi Shafiee Afarani, Alimohamad Mesbahinia, Majid Rashidi Huyeh, Persian turquoise glazed bodies reproduction and optical properties, APPLIED PHYSICS A-MATERIALS SCIENCE and PROCESSING. (2015) 118 1183-1188 View Paper
44 - Ali Naeimi, , Mahdi Shafiee Afarani, , In situ synthesis and electrophoretic deposition of CNT ZnS Mn luminescent nanocomposites, JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS. (2015) 26 1403-1412
45 - , Abdolreza Samimi, Mahdi Shafiee Afarani, , Synthesis of titania-gama-alumina multilayer nanomembranes on performance-improved alumina supports for wastewater treatment, Desalination and Water Treatment. (2015) 1-8
46 - , Majid Rashidi Huyeh, Mahdi Shafiee Afarani, Persian turquoise glazed bodies: reproduction and optical properties, APPLIED PHYSICS A-MATERIALS SCIENCE and PROCESSING. (2015) 118 1183-1188
47 - Hesam Saidi, Ghodratollah Roudini, Mahdi Shafiee Afarani, High-volume-fraction Cu/Al2O3–SiC hybrid interpenetrating phase composite, APPLIED PHYSICS A-MATERIALS SCIENCE and PROCESSING. (2015) 121 109-113
48 - Mozhgan Zahed, Mahdi Shafiee Afarani, Davod Mohebbi Kalhori, A novel method for fabrication of alumina foams with ellipsoidal aligned oriented pores, APPLIED PHYSICS A-MATERIALS SCIENCE and PROCESSING. (2015) 120 215-220
49 - Motahare Mozaffari naiini, , Mahdi Shafiee Afarani, Synthesis of Hollow Tadpole-Like Silica Particles, PARTICULATE SCIENCE AND TECHNOLOGY. (2015) 33 456-462
50 - , , Mahdi Shafiee Afarani, , In situ synthesis and electrophoretic deposition of CNT-ZnS:Mn luminescent nanocomposites, JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS. (2015) 26 1403-1412
51 - Emad Khaksar, Mahdi Shafiee Afarani, Abdolreza Samimi, In Situ Sollvothermal crystallization of Tio2 Nanostructure on Alumina Granules for photocatalytic wastewater treatment, JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE. (2014) 23 92-100
52 - Emad Khaksar, Mahdi Shafiee Afarani, Abdolreza Samimi, In Situ Solvothermal Crystallization of TiO2 Nanostructure on Alumina Granules for Photocatalytic Wastewater Treatment, JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE. (2014) 23 92-100
53 - , , Mahdi Shafiee Afarani, Co-precipitation synthesis of nanoY2O3 Eu3 with different morphologies, CERAMICS INTERNATIONAL. (2014) 40 10877-10885
54 - , Masoud Shayesteh, Mahdi Shafiee Afarani, Abdolreza Samimi, Effect of ammonium nitrate on microstructureand permeability characteristics of tubular alumina support using slip casting fabrication method, JOURNAL OF CERAMIC PROCESSING RESEARCH. (2013) 14 1-4
55 - Mahdi Shafiee Afarani, Abdolreza Samimi, , Synthesis of alumina granules by high shear mixer granulator Processing and sintering, POWDER TECHNOLOGY. (2013) 237 32-40
56 - Mahdi Shafiee Afarani, , M. Sharifitabar, Synthesis of Ti C N ceramic layer on surface of Ti-6A1-4V alloy via pack nitro-carburizing route, SURFACE and COATINGS TECHNOLOGY. (2013) 219 94-100
57 - Masoud Shayesteh, Mahdi Shafiee Afarani, Abdolreza Samimi, Mohammad Khorram, Preparation of Y-alumina and perioretization of affecting factors on the crystallite size using Taguchi method, Transport Phenomena in Nano and Micro Scales. (2013) 1 45-52
58 - , Masoud Shayesteh, Mahdi Shafiee Afarani, Abdolreza Samimi, Effect of ammonium nitrate on microstructure and permeability characteristics of tubular alumina support using slip casting fabrication method, JOURNAL OF CERAMIC PROCESSING RESEARCH. (2013) 472-475
59 - , Mahdi Shafiee Afarani, Abdolreza Samimi, , Preparation of gama-Al2o3 and prioritization of affecting factors on the crystallite size using Taguchi method, Transport Phenomena in Nano and Micro Scales. (2013) 45-52
60 - , Mahdi Shafiee Afarani, Ghodratollah Roudini, Synthesis of alumina porous supports via different compaction routes: vibration and pressing, Journal of Chemical Technology and Metallurgy. (2013) 3 289-295
61 - , MOHSEN NAZARZADEH, Mahmood Sharifitabar, Mahdi Shafiee Afarani, Gas tungsten arc welding of CP-copper to 304 stainless steel using different filler materials, TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA. (2012) 22 2937-2942
62 - Mahdi Shafiee Afarani, Mahmood Sharifitabar, Asma Sarani, , Fabrication of 5052Al/Al2O3 nanoceramic particle reinforced composite via friction stir processing route, materials design. (2011) 4164-4172
63 - Esmaeil Tohidlou, , , Mahdi Shafiee Afarani, Effect of Zn addition on optical properties and microstructure of Y2O3 Eu nanopowders prepared by combustion method, PHYSICA STATUS SOLIDI B-BASIC SOLID STATE PHYSICS. (2010) 2663-2666